R&S FSV-K7 Operating Manual page 183

®
R&S FSV-K7/K7S
2.3.10.3 MMEMory subsystem
MMEMory:STORe<n>:LIST <FileName>
This command stores the current list evaluation results in a <file name>.dat file.
The file consists of a data section containing the list evaluation results.
Suffix:
<n>
Parameters:
<FileName>
Example:
Manual operation:
MMEMory:STORe<n>:TRACe <Trace>, <FileName>
This command stores the selected trace in the specified window in a file with ASCII for-
mat. The file format is described in
on page 23
The decimal separator (decimal point or comma) for floating-point numerals contained
in the file is defined with the FORMat:DEXPort:DSEParator command (see
FORMat:DEXPort:DSEParator
Suffix:
<n>
Parameters:
<Trace>
<FileName>
Example:
Manual operation:
2.3.10.4 OUTPut subsystem
OUTPut:DIQ <State>
If enabled, the captured IQ data is output to the R&S Digital I/Q Interface in a continu-
ous stream. This function requires the LVDS interface option (R&S FSV-B17).
Digital input and digital output cannot be used simultaneously.
Operating Manual 1176.7561.02 ─ 06
Analog Demodulation Option R&S FSV–K7
Remote Commands of the Analog Demodulation (R&S FSV–K7)
.
irrelevant
<file name>
MMEM:STOR:LIST 'test'
Stores the current list evaluation results in the test.dat file.
See "ASCII File Export"
Chapter 2.1.11, "ASCII File Export
on page 185).
.
window; For applications that do not have more than 1 measure-
ment window, the suffix <n> is irrelevant.
1 to 6
Selected a trace.
DOS file name
The file name includes indication of the path and the drive name.
Indication of the path complies with DOS conventions.
MMEM:STOR:TRAC 3,'TEST.ASC'
Stores trace 3 in the file TEST.ASC.
See "ASCII Trace Export"
on page 75
on page 63
Format",
183