R&S FSV-K7 Operating Manual page 168

®
R&S FSV-K7/K7S
Example:
Operating Manual 1176.7561.02 ─ 06
Analog Demodulation Option R&S FSV–K7
Remote Commands of the Analog Demodulation (R&S FSV–K7)
EXTern
External trigger
IFPower
Power trigger at the second intermediate frequency
TIME
Time interval
GP0 | GP1 | GP2 | GP3 | GP4 | GP5
For I/Q Analyzer or AnalogDemod mode only:
Defines triggering of the measurement directly via the LVDS
connector. The parameter specifies which general purpose bit (0
to 5) will provide the trigger data.
This trigger mode is available for input from the R&S Digital I/Q
Interface (option R&S FSV-B17) only.
The assignment of the general purpose bits used by the Digital
IQ trigger to the LVDS connector pins is provided in
VIDeo
Video mode is only available in the time domain and only in
Spectrum mode.
BBPower
Baseband power (for digital input via the R&S Digital I/Q Inter-
face, R&S FSV-B17)
PSEN
External power sensor (requires R&S FSV-K9 option)
AF
AF power signal
FM
FM power signal
AM
corresponds to the RF power signal
AMRelative
corresponds to the AM signal
PM
PM power signal
*RST: IMMediate
TRIG:SOUR EXT
Selects the external trigger input as source of the trigger signal
Table 2-5
168