R&S FSV-K7 Operating Manual page 167

®
R&S FSV-K7/K7S
Mode:
Manual operation:
TRIGger<n>[:SEQuence]:LEVel:VIDeo <Value>
This command sets the level of the video trigger source.
Suffix:
<n>
Parameters:
<Value>
Example:
TRIGger<n>[:SEQuence]:SLOPe <Type>
This command selects the slope of the trigger signal. The selected trigger slope
applies to all trigger signal sources.
Suffix:
<n>
Parameters:
<Type>
Example:
Manual operation:
TRIGger<n>[:SEQuence]:SOURce <Source>
This command selects the trigger source.
For triggering with AF, AM, AMRelative, FM, and PM trigger sources to be successful,
the measurement time must cover at least 5 periods of the audio signal. For details on
trigger modes refer to the
IF power and RF power triggers are not available together with the bandwidth exten-
sion option R&S FSV-B160.
For details on trigger modes refer to the "Trg/Gate Source" softkey in the base unit
description.
Suffix:
<n>
Parameters:
<Source>
Operating Manual 1176.7561.02 ─ 06
Analog Demodulation Option R&S FSV–K7
Remote Commands of the Analog Demodulation (R&S FSV–K7)
All
See "Repetition Interval"
.
irrelevant
0 to 100 PCT
*RST: 50 PCT
TRIG:LEV:VID 50PCT
.
irrelevant
POSitive | NEGative
*RST: POSitive
TRIG:SLOP NEG
See "Trigger Polarity"
Trigger Source softkey.
.
irrelevant
IMMediate
Free Run
on page 67
on page 66
167