R&S FSV-K7 Operating Manual page 145

®
R&S FSV-K7/K7S
[SENSe:]ADEMod<n>:ZOOM:LENGth:MODE <Mode>
The command defines whether the length of the zoom area for the analog-demodula-
ted measurement data is defined automatically or manually in the specified window. By
default and in automatic mode, the number of sweep points is used as the zoom
length. If the zoom length was already entered using
LENGth
Suffix:
<n>
Parameters:
<Mode>
Example:
Mode:
Manual operation:
2.3.6.4 SENSe:ADJust Subsystem
The ADJust subsystem controls automatic definition of frequency and level settings.
[SENSe:]ADJust:ALL
[SENSe:]ADJust:CONFiguration:HYSTeresis:LOWer
[SENSe:]ADJust:CONFiguration:HYSTeresis:UPPer
[SENSe:]ADJust:CONFigure:LEVel:DURation
[SENSe:]ADJust:FREQuency
[SENSe:]ADJust:LEVel
[SENSe:]ADJust:SCALe:Y:AUTO[:CONTinuous]
[SENSe:]ADJust:ALL
This command determines the ideal frequency and level configuration for the current
measurement.
Example:
Manual operation:
[SENSe:]ADJust:CONFiguration:HYSTeresis:LOWer <Threshold>
This command defines a lower threshold the signal must drop below before the refer-
ence level is automatically adjusted when the "Auto Level" function is performed.
For more information see [SENSe:]ADJust:LEVel).
Operating Manual 1176.7561.02 ─ 06
Remote Commands of the Analog Demodulation (R&S FSV–K7)
on page 144, manual zoom mode is set automatically.
.
1...4
window
AUTO | MAN
*RST:
ADEM:ZOOM:LENG:MODE MAN
Zoom function uses the length defined manually.
ADEMOD
See "Length Auto"
......................................................................................................145
.......................................................................................... 146
................................................................................................... 147
ADJ:ALL
See "Auto All"
Analog Demodulation Option R&S FSV–K7
[SENSe:]ADEMod<n>:ZOOM:
AUTO
on page 36
......................................................... 145
..........................................................146
................................................................... 146
............................................................... 147
on page 49
145