R&S FSV-K7 Operating Manual page 190

®
R&S FSV-K7/K7S
Screen configuration
For each screen you can define:
●
Off: Whether it is displayed or not
●
Summary: Whether a result summary for all screens is displayed instead of a dia-
gram
●
RF Diagrams: Whether an RF diagram is displayed; these displays correspond to
those for Analog Demodulation mode (R&S FSV-K7, see
surement Result
●
FM Stereo Diagrams: For which channel a time domain or spectrum diagram
is displayed
Diagram types
The following diagram types can be selected for display.
●
RF Time Domain
Selects the display of the RF power in zero span. In contrast to normal analyzer
operation, the level values are the magnitude of the I/Q data set.
SCPI command:
CALC:FEED 'XTIM:RFP' (see
●
RF Spectrum
Selects the display of the RF signal in span > 0. In contrast to normal spectrum
analyzer operation, the measured values are determined using FFT from the recor-
ded I/Q data set.
SCPI command:
CALC:FEED 'XTIM:SPECTRUM' (see
●
<FM Stereo Channel Type> Time Domain
Selects the display of the channel power in zero span. In contrast to normal ana-
lyzer operation, the level values are the magnitude of the I/Q data set.
SCPI command:
CALC:FEED 'XTIM:SFM:<ChannelType>', e.g. CALC:FEED 'XTIM:SFM:LEFT'
(see
●
<FM Stereo Channel Type> Spectrum
Selects the display of the channel signal in span > 0. In contrast to normal spec-
trum analyzer operation, the measured values are determined using FFT from the
recorded I/Q data set.
SCPI command:
CALC:FEED 'XFR:SFM:<ChannelType>', e.g. CALC:FEED 'XFR:SFM:LEFT'
(see
Diagram header information
For each diagram, the header provides the following information:
Operating Manual 1176.7561.02 ─ 06
Display",
CALCulate<n>:FEED
CALCulate<n>:FEED
FM Stereo Option R&S FSV–K7S
Instrument Functions FM Stereo (R&S FSV–K7S)
on page 20)
CALCulate<n>:FEED
CALCulate<n>:FEED
on page 90)
on page 90)
Chapter 2.1.10, "Mea-
on page 90)
on page 90)
190