R&S FSV-K7 Operating Manual page 36

®
R&S FSV-K7/K7S
Remote command:
UNIT:THD
Abs. Dev Unit (kHz/dBm) ← Unit ← AF Range ← AM
Sets the unit for absolute deviation to kHz or dBm. This softkey is only available with
the FM Stereo option K7S.
Remote command:
UNIT:ADEV
Rel. Dev Unit (dB / %) ← Unit ← AF Range ← AM
Sets the unit for relative deviation to dB or percent. This softkey is only available with
the FM Stereo option K7S.
Remote command:
UNIT:RDEV
Time Domain Zoom ← AM
Opens a submenu to activate and configure the zoom function.
State On / Off ← Time Domain Zoom ← AM
Activates or deactivates the time domain zoom according to the defined settings.
"ON"
"OFF"
Remote command:
[SENSe:]ADEMod<n>:ZOOM[:STATe]
Start ← Time Domain Zoom ← AM
Opens an edit dialog box to define the start time for the zoom area.
Remote command:
[SENSe:]ADEMod<n>:ZOOM:STARt
Length Manual ← Time Domain Zoom ← AM
Opens an edit dialog box to define the length of the zoom area (as a time value) man-
ually.
Remote command:
[SENSe:]ADEMod<n>:ZOOM:LENGth
Length Auto ← Time Domain Zoom ← AM
Automatically sets the length of the zoom area to the number of sweep points (see
"Sweep Points"
Remote command:
[SENSe:]ADEMod<n>:ZOOM:LENGth:MODE
Operating Manual 1176.7561.02 ─ 06
on page 170
on page 249
on page 250
Activates the time domain zoom. The zoom area is defined using the
"Start""Start" on page 36 and "Length
on page 36 / "Length
If more measured values than measurement points are available,
several measured values are combined in one measurement point
according to the method of the selected trace detector. For details on
detectors refer to
on page 57).
Analog Demodulation Option R&S FSV–K7
Softkeys of the Analog Demodulation option
Manual""Length Manual"
Auto""Length Auto"
Chapter 2.1.8, "Detector
on page 143
on page 144
on page 144
on page 145
on page 36 softkeys.
Overview", on page 19.
36