R&S FSV-K7 Operating Manual page 249

®
R&S FSV-K7/K7S
Example:
Mode:
3.2.6 UNIT Subsystem (FM Stereo, R&S FSV–K7S)
UNIT:ADEV <Unit>
Selects the unit for absolute deviation measurements.
Parameters:
<Unit>
Example:
Mode:
Manual operation:
UNIT:ANGLe <Unit>
This command selects the unit for angles (e.g. for PM display).
The unit is defined globally for all windows.
Suffix:
<n>
Parameters:
<Unit>
Example:
Mode:
UNIT:POWer <Unit>
This command selects the unit for power.
Operating Manual 1176.7561.02 ─ 06
Remote Commands of the FM Stereo Option (R&S FSV–K7S)
SMONo
Triggering via mono stereo signal
SSTereo
Triggering via stereo FM signal
SRDS
Triggering via RDS stereo signal
SPILot
Triggering via pilot stereo signal
*RST: IMM
TRIG:SEQ:SOUR:SRDS
Defines triggering on the RDS stereo signal.
SFM
HZ | DBM
*RST: HZ
UNIT:ADEV DBM
SFM
See "Abs. Dev Unit (kHz/dBm)"
.
irrelevant
DEG | RAD
*RST: RAD
UNIT:ANGL DEG
ADEMOD, SFM
FM Stereo Option R&S FSV–K7S
on page 36
249