How To Make A Directory - Agilent Technologies 1660A Series User Reference

How to Make a Directory

The Make a Directory operation is used to create a new, blank directory or
sub-directory on a DOS disk. After a new directory is created, files can be
copied and stored using the COPY and STORE functions. Note that only the
selected directory's contents are shown (the selected directory is displayed
in the lower left portion of the display). The Change Dir. selection is used to
change directories. On LIF disks, the Make a Directory operation is not
displayed.
To make a new directory on the DOS disk, perform the following steps:
Select the Make Directory operation.
1
Press the
2
field, then press the
Using the front-panel keypad, type in the new directory name, then
3
press the
If you are currently in a directory, the Make a Directory selection will create a
sub-directory within the current directory.
Press the
4
press the
Change Directory field
Current Directory
Make Directory Operation
keys to move the cursor to the New Directory Name
arrow
key.
Select
key.
Select
keys to move the cursor to the Execute field, then
arrow
key.
Select
Disk Drive Operations
How to Make a Directory
new directory
name field
Execute field
6–25