Firmware Update
Firmware Update
Firmware Update
Required Equipment
•
•
How to make E5061A/E5062A Firmware Installation Disk
The following is the procedure to make the E5061A/E5062A Firmware Installation Disk.
Step 1. Copy the following files from Agilent Technologies web site to the four floppy disks using
your computer's FDD.
•
•
•
•
Step 2. Assign the Label name as follows using the properties of your computer's Windows
Explorer as shown in Figure C-1.
•
•
•
•
Figure C-1
Windows Explorer (example)
1. Insert the disk1(1 of 4) into the FDD of your computer.
2. On the Windows Explorer, click 3 1/2 Floppy [A:] and confirm the files.
3. Right click on 3 1/2 Floppy [A:], then click Properties. The Properties dialog box
4. Enter the Label name in the Label box of properties dialog box (General) for the disk1
220
E5061A or E5062A (with keyboard and mouse).
Four blank floppy disks (DOS format).
disk1(1 of 4)-- e5062.msi, e506201.cab
disk2(2 of 4)-- e506202.cab
disk3(3 of 4)-- e506203.cab
disk4(4 of 4)-- e506204.cab
DISK_1 (for disk1)
DISK_2 (for disk2)
DISK_3 (for disk3)
DISK_4 (for disk4)
appears.
Appendix C