[Sense<1|2>:]Frequency:start 0 To Fmax; [Sense<1|2>:]Frequency:stop 0 To Fmax - Agilent Technologies X Series User Manual

Compatible SCPI Commands
Supported SCPI Commands
Example
Remote Command Notes
Backwards Compatibility SCPI
[SENSe<1|2>:]FREQuency:STARt 0 to fmax
Specifies the analyzer's start frequency. This command is available only in the frequency domain (span
> 0).
Remote Command
Example
Remote Command Notes
Preset
State Saved
Min
Max
[SENSe<1|2>:]FREQuency:STOP 0 to fmax
Specifies the analyzer's stop frequency. This command is available only in the frequency domain (span >
0).
Remote Command
Example
Remote Command Notes
Preset
State Saved
Min
Max
140
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
FREQ:SPAN:FULL
FSE, FSP, FSU
:SENSe1:FREQuency:SPAN:FULL
[:SENSe]:FREQuency:STARt <freq>
[:SENSe]:FREQuency:STARt?
FREQ:STAR 200MHz
FREQ:STAR?
FSE, FSP, FSU
0 Hz
Saved in instrument state.
0Hz
Depends on the instrument maximum frequency
[:SENSe]:FREQuency:STOP <freq>
[:SENSe]:FREQuency:STOP?
FREQ:STOP 220MHz
FREQ:STOP?
FSE, FSP, FSU
3GHZ
Saved in instrument state.
0Hz
27.0 GHz