To Use Delta () Markers - Agilent Technologies 8753ET User Manual

Hide thumbs Also See for 8753ET:

Table of Contents

Making Measurements

Using Markers

Figure 1-15 Marker Information on the Graticules

You can also restore the softkey menu by pressing a hardkey which opens a menu (such as

pressing a softkey.

To Use Delta (

This is a relative mode, where the marker values show the position of the active marker relative to the delta

reference marker. You can switch on the delta mode by defining one of the five markers as the delta

2. To move marker 1 to any point that you want to reference:

• Turn the front panel knob.

• Enter the frequency value (relative to the reference marker) on the numeric keypad.

and move marker 2 to any position that you want to measure in reference to

to make marker 1 a reference marker.