Complex Spectrum Measurement
Marker Function
Marker Function
Opens the Marker Function menu.
Key Path
Initial S/W Revision
Select Marker
Displays 12 markers available for selection.
Key Path
Initial S/W Revision
Marker Function Type
Sets the marker control mode as described under
dependencies detailed under the key description are enforced when the remote command is sent.
Key Path
Mode
Remote Command
Example
Notes
Preset
State Saved
Range
Initial S/W Revision
Band Adjust
Opens a menu of keys that allow you to modify the band.
Key Path
236
Front-panel key
Prior to A.02.00
Marker Function
Prior to A.02.00
,
Normal
Marker Function
BASIC
:CALCulate:SPECtrum:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:
FUNCtion NOISe|BPOWer|BDENsity|OFF
:CALCulate:SPECtrum:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:
FUNCtion?
CALC:SPEC:MARK:FUNC NOIS
CALC:SPEC:MARK:FUNC?
You must be in the IQ Analyzer (Basic) mode to use this command. Use
INSTrument:SELect to set the mode.
OFF
Saved in instrument state.
Marker Noise | Band/Interval Power | Band Interval Density | Marker
Function Off
Prior to A.02.00
Marker Function
and
, below. All interactions and
Delta
Off