Marker Function Menu - Agilent Technologies ENA Series User Manual

Softkey Functions

Marker Function Menu

Marker Function Menu
Key Operation
Displays softkeys for setting the sweep range using markers and other marker options.
Sets the starting frequency to the stimulus value of the active marker on the
Marker ® Start
active trace. Even if the reference marker is enabled and a relative stimulus
value is displayed, the absolute value will be used.
Sets the ending frequency to the stimulus value of the active marker on the
Marker ® Stop
active trace. Even if the reference marker is enabled and a relative stimulus
value is displayed, the absolute value will be used.
Sets the center frequency to the stimulus value of the active marker on the
Marker ® Center
active trace. Even if the reference marker is enabled and a relative stimulus
value is displayed, the absolute value will be used.
Sets the value of the reference line to the response value of the active
Marker ® Reference
marker on the active trace. A softkey having the same function is also
provided in "Scale Menu" on page 444.
Enables or disables the discrete marker function. When enabled, the marker
Discrete
will be placed at the nearest measurement point from the specified marker
stimulus value. When disabled, the marker will be placed at the point
corresponding to the specified marker stimulus value (by interpolating gaps
between measurement points).
Enables or disables marker coupling. When enabled, marker settings and
Couple
movements become effective for all traces on a channel. When disabled,
marker settings and movements are done independently on each trace.
Enables or disables the marker table display. The marker table lists the
Marker Table
values of markers for all traces defined on a channel using the bottom third
of the screen. If a channel holds too many markers to be displayed in the
display area, use the scroll bar on the right to view the entire table.
Enables or disables the display of statistics. When enabled, the following
Statistics
three statistical data items (Mean value, Standard deviation, Peak-to-peak)
will be displayed on the screen. For details, see "Determining the Mean,
Standard Deviation, and p-p of the Trace" on page 142.
Returns to the "E5070A/E5071A Menu (Top Menu)" on page 404.
Return
432
Function SCPI Command
:CALC{1-9}:MARK{1-10}:SET STAR
:CALC{1-9}:MARK{1-10}:SET STOP
:CALC{1-9}:MARK{1-10}:SET CENT
:CALC{1-9}:MARK{1-10}:SET RLEV
:CALC{1-9}:MARK{1-10}:DISC
:CALC{1-9}:MARK{1-10}:COUP
:DISP:TABL
:DISP:TABL:TYPE MARK
:CALC{1-9}:MST
Appendix D