Calculate:marker:function Subsystem; Calculate<1|2>:Marker<1 - Agilent Technologies X Series User Manual

The query returns the current value of this setting.
Remote Command
Example
Remote Command Notes
Preset
State Saved

CALCulate:MARKer:FUNCtion Subsystem

CALCulate<1|2>:MARKer<1...4>:FUNCtion:CENTer
Sets the center frequency of the selected measurement window equal to the frequency of the indicated
marker.
Remote Command
Example
Notes
CALCulate<1|2>:MARKer<1...4>:FUNCtion:CSTep
Sets the step width of the center frequency in the selected measurement window to the X value of the
current marker.
Remote Command
Example
Notes
CALCulate<1|2>:MARKer<1...4>:FUNCtion:FPEaks
Searches the selected trace for the indicated number of maxima.
Remote Command
Example
Notes
Preset
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
:CALCulate[1]:MARKer[1]|2|3|4:PEXCursion <rel_ampl>
:CALCulate[1]:MARKer[1]|2|3|4:PEXCursion?
CALC:MARK:PEXC 10dB
FSE, FSP, FSU
6dB
Saved in instrument state.
:CALCulate[1]:MARKer[1]|2|3|4:FUNCtion:CENTer
CALC:MARK:FUNC:CENT
FSE, FSP, FSU
:CALCulate[1]:MARKer[1]|2|3|4:FUNCtion:CSTep
CALC:MARK:FUNC:CST
FSE, FSP, FSU
:CALCulate[1]:MARKer[1]|2|3|4:FUNCtion:FPEaks[:IMMediat
e] <int>
:CALCulate[1]:MARKer[1]|2|3|4:FUNCtion:FPEaks[:IMMediat
e]?
CALC:MARK:FUNC:FPE 5
FSE, FSP, FSU
0
Compatible SCPI Commands
Supported SCPI Commands
93