System Verification and Performance Tests
Sections in This Chapter
Sections in This Chapter
This chapter consists of five sections.
How to Test the Performance of Your Analyzer
•
ANSI/NCSL Z540–1–1994 Verification‚ on page 2-3
•
Non-ANSI/NCSL Z540–1–1994 Verification‚ on page 2-3
•
Instrument Verification Cycle, on page 2-4
•
ANSI/NCSL Z540–1–1994 Test Path Verification Flowchart, on page 2-4
•
Non–ANSI/NCSL Z540–1–1994 Test Path Verification Flowchart, on page 2-5
Preliminary Tests
•
Check the Temperature and Humidity, on page 2-6
•
Clean and Gauge All Connectors, on page 2-7
•
Perform the Internal Test, on page 2-7
•
Procedure to Perform Operator's Check, on page 2-8
•
Check the Test Port Cables, on page 2-9
System Verification
•
Equipment Initialization, on page 2-20
•
Measurement Calibration, on page 2-22
•
Verification Device Measurements, on page 2-25
•
Interpreting the Verification Results, on page 2-31
Performance Tests
•
Frequency Accuracy Performance Test, on page 2-34
•
Level Accuracy Performance Test, on page 2-36
•
Source Linearity Performance Test, on page 2-38
•
Dynamic Range Performance Test, on page 2-42
Performance Test Records
•
Performance Test Record, on page 2-46
2-2
8719ET/20ET/22ET
8719ES/20ES/22ES
RF Network Analyzers
Service Guide