All Markers Off; Backward Compatibility Scpi Commands - Agilent Technologies X Series Manual

Range
Initial S/W Revision

All Markers Off

Turns off all markers.
Key Path
Mode
Remote Command
Example
Notes
Initial S/W Revision

Backward Compatibility SCPI Commands

Sets or queries the state of a marker. Setting a marker that is OFF to state ON or 1 puts it in Normal mode
and places it at the center of the screen.
Mode
Remote Command
Example
Notes
Preset
State Saved
Range
Initial S/W Revision
On|Off
Prior to A.02.00
Marker
BASIC
:CALCulate:SPECtrum:MARKer:AOFF
CALC:SPEC:MARK:AOFF
You must be in the IQ Analyzer (Basic) mode to use this command. Use
INSTrument:SELect to set the mode.
Prior to A.02.00
BASIC
:CALCulate:SPECtrum:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:
STATe OFF|ON|0|1
:CALCulate:SPECtrum:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:
STATe?
CALC:SPEC:MARK3:STAT ON
CALC:SPEC:MARK3:STAT?
You must be in the IQ Analyzer (Basic) mode to use this command. Use
INSTrument:SELect to set the mode.
OFF
Saved in instrument state.
On | Off
Prior to A.02.00
Complex Spectrum Measurement
Marker
235