▶ Infiniband ConnectX6 controller two sets are in total installed in:
slot 1 (CPU 1) (1) / slot 5 (CPU 2) (2)
slot 7 (CPU 3) (3) / slot 4 (CPU 4) (4)
Concluding steps
▶
"Reassembling" on page
▶
"Connecting the power cord (AC PSU)" on page
▶
"Switching on the server" on page
▶
"Resuming BitLocker functionality" on page
9.7.3
Removing an expansion card
Upgrade and Repair Unit
(URU)
Tools:
Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Disabling the boot watchdog" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶ If necessary, remove all external cables from the expansion card to be
removed.
▶ For slot 3, 4, 5, 6 and 7: Remove the corresponding riser module, see
"Handling riser modules" on page
Removing the expansion card
▶ If necessary, disconnect the cables from the expansion card.
▶ If applicable,
"Removing an SFP+ transceiver module" on page
RX4770 M5
Expansion cards and backup units
53.
59.
86.
45.
60.
Upgrade and Maintenance Manual
58.
108.
Hardware: 10 minutes
46.
47.
180.
209