Removing An Expansion Card - Fujitsu PRIMERGY RX1330 M4 Upgrade And Maintenance Manual

For the cable plan, see
Concluding steps
▶ Install the corresponding riser module, see
page 61.
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶
"Updating expansion card firmware" on page
▶
"Enabling Option ROM scan" on page
▶
"Resuming BitLocker functionality" on page
9.5.2

Removing an expansion card

Upgrade and Repair Unit
(URU)
Tools: tool-less
Preliminary steps
▶
"Suspending BitLocker functionality" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶ Remove the corresponding riser module, see
page 59.
Removing the expansion card
▶ If applicable, disconnect internal cables from the expansion card.
RX1330 M4
Expansion cards and backup units
"Appendix B" on page
52.
56.
58.
73.
45.
Upgrade and Maintenance Manual
365.
"Installing a riser module" on
72.
86.
Hardware: 5 minutes
65.
46.
48.
"Removing a riser module" on
203