Removing Expansion Cards; Preliminary Steps; Removing An Expansion Card - Fujitsu PRIMERGY RX2520 M4 Upgrade And Maintenance Manual

9.4.2

Removing expansion cards

Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver / hexagon screw driver 5 mm
9.4.2.1

Preliminary steps

"Locating the defective server" on page 45
Ê
"Suspending BitLocker functionality" on page 67
Ê
"Shutting down the server" on page 48
Ê
Ê Remove all external cables from the expansion card to be removed.
"Disconnecting the power cord" on page 49
Ê
"Getting access to the component" on page 50
Ê
9.4.2.2

Removing an expansion card

Ê If applicable, disconnect internal cables from the expansion card.
Ê If applicable, "Removing the SFP+ transceiver modules" on page
Figure 122: Removing an expansion card
Ê Remove the screw (see circle).
Ê Carefully remove the expansion card from its slot (see arrow).
RX2520 M4
Upgrade and Maintenance Manual
Expansion cards and backup units
Hardware: 5 minutes
204.
213