Gvrp Port Setting - Planet IGS-4215-4P4Tv2 User Manual

Industral l2/l4 managed gigabit poe switch
Table of Contents

Advertisement

The page includes the following fields:
Object
GVRP Status
• Join Timeout
• Leave Timeout
• LeaveAll Timeout

4.5.11 GVRP Port Setting

The GVRP Port Setting/Status screens in
The page includes the following fields:
Object
Port Select
• GVRP Enabled
• Registration Mode
• VLAN Creation
Buttons
: Click to apply changes.
Description
Displays the current GVRP status.
Displays the current join timeout parameter.
Displays the current leave timeout parameter.
Displays the current leaveall timeout parameter.
Figure 4-5-15
and
Figure 4-5-16
Figure 4-5-15: GVRP Global Setting Page Screenshot
Description
Select port for this drop-down list to assign protocol VLAN port.
Controls whether GVRP is enabled or disabled on port.
By default GVRP ports are in normal registration mode. These ports use GVRP
join messages from neighboring switches to prune the VLANs running across the
802.1Q trunk link. If the device on the other side is not capable of sending GVRP
messages, or if you do not want to allow the switch to prune any of the VLANs,
use the fixed mode. Fixed mode ports will forward for all VLANs that exist in the
switch database. Ports in forbidden mode forward only for VLAN 1.
GVRP can dynamically create VLANs on switches for trunking purposes. By
enabling GVRP dynamic VLAN creation, a switch will add VLANs to its database
when it receives GVRP join messages about VLANs it does not have.
151
User's Manual of IGS-4215 PoE Series
appear.

Advertisement

Table of Contents
loading

Table of Contents