Pse Port Enable; Pd Type - Planet GSW-1820VHP User Manual

2.3.4 PSE Port Enable

Allows user to disable or enable per port PoE function. The default is "Enable".

2.3.5 PD Type

Changing the PoE power-up mode can let non-standard PDs pass the procedures
of PoE power delivery process. This way, the switch can supply power to non-
standard PDs. The GSW 802.3at PoE+ Switch series can set the PoE power-
up mode to be in Enhance mode, Standard mode or Legacy mode by the user
interface.
Object
On the basis of standard mode, change the PD of class 0 to
Enhance
AT mode; in addition, the current surge limit during power up
(default)
increases to the current limit of AT.
Standard Fully conforms to the IEEE 802.3 af/at standard.
The legacy detection is to identify the PD devices that did
not follow the IEEE 802.3af standard, their unique electrical
Legacy
signatures, in order for the PoE switch to provide the power to
those PD devices.
22
Description