Clear Arp-Cache - D-Link DGS-6600-48TS Manual

DGS-6604 m

clear arp-cache

clear arp-cache [interface INTERFACE-ID | IP-ADDRESS]
Syntax Description
INTERFACE-ID
IP-ADDRESS
Default
Command Mode
Usage Guideline
Example
Switch#clear arp-cache
CLI Reference Guide
To remove dynamically created entries from the Address Resolution Protocol
(ARP) cache, use the clear arp-cache command in Privileged EXEC mode.
(Optional) Removes only the ARP table entries associated with this interface
such as for example, vlan100 for the VLAN interface.
(Optional) IP address to clear from the ARP table.
None
Privileged EXEC
This command is used to delete dynamic entries from the ARP cache. The user
can select to delete all dynamic entries, specific dynamic entries, or dynamic
entries that are associated with a specific IP interface.
This example shows how to removes all dynamic entries from the ARP cache.
clear arp-cache
90