Clear Arp-Cache - D-Link xStack DGS-3620 Series Reference Manual

DGS-3620 m/ mSW Rls. 1.02.000

1-5 clear arp-cache

clear arp-cache [vrf <string 1-12>] [ip-address] [interface interface-name]
Syntax Description
vrf <string 1-12>
ip-address
interface interface-
name
Default
Command Mode
Usage Guideline
Example
Switch# clear arp-cache
Example
Switch# clear arp-cache 1.1.1.1
Example
Switch# clear arp-cache interface Vlan1
CLI Reference Guide
Use this command to remove a dynamic ARP mapping record from the ARP
cache table and clear an IP route cache table in the global configuration mode.
Specifies the VRF that the IP resides in. If no VRF name is specified, the global
instance will be used.
(Optional) Specify the IP address of the dynamic ARP entry
(Optional) Specify the interface from which the dynamic ARP entry was learned
None
Privileged mode
This command can be used to refresh an ARP cache table.
The following is an example of removing all dynamic ARP mapping records:
The following is an example of removing dynamic ARP table entry 1.1.1.1:
The following is an example of removing dynamic ARP table entry on interface
SVI1:
clear arp-cache
6