To connect to your network
Turn off the logic analyzer.
1
Connect the analyzer to your network using an RJ-45 or BNC
2
connector.
Ethertwist and thinlan are the two most common types of LAN network
connection. Ethertwist uses unshielded twisted pair and an RJ-45 connector,
and resembles a standard modular phone line. Thinlan uses coaxial cable. If
you are unsure what your network uses for its physical connection, contact
your local network administrator.
The logic analyzer LAN ports are on the back panel. The RJ-45 connector
goes in the port labeled "LAN-TP" and the BNC attaches to the port labeled
"LAN-BNC".
Turn on the logic analyzer.
3
Connecting and Configuring
To connect to your network
1–3