Subaru Impreza 2003 Service Manual page 2803

• The removed front seat with the airbag module
must be kept at least 200 mm (8 in) away from walls
and other objects.
(1) More than 200 mm (8 in)
• Do not use the airbag or pretensioner parts from
other vehicles. Always replace defective parts with
new parts.
• Never reuse a deployed airbag or pretensioner.
• When painting or performing sheet metal work
on the front part of the vehicle, including the front
wheel apron, front fender, and front side frame, re-
move the front sub sensors and wire harness of the
airbag system.
• When painting or performing sheet metal work
on the side of the vehicle, including the side sill,
center pillar, and front and rear doors, remove the
side airbag sensors and wire harness of the airbag
system.
GENERAL DESCRIPTION
(1)
AB-00128
AB-00129
AB-5
AIRBAG SYSTEM