MASTER CYLINDER
BRAKE
5) Install the seal to reservoir tank.
(1)
BR-00072
(1) Seal
6) Install the reservoir tank to master cylinder and
secure with pin.
E: INSPECTION
If any damage, deformation, wear, swelling, rust,
and other faults are found on the primary piston as-
sembly, secondary piston assembly, supply the
valve stopper, or gasket, replace the faulty part.
NOTE:
• The primary and secondary pistons must be re-
placed as complete assemblies.
• The service limit of clearance between each pis-
ton and the master cylinder inner dia. is 0.11 mm
(0.0043 in).
BR-54