POWER ASSISTED SYSTEM (POWER STEERING)
8) Slide the dust cover out.
(1)
(1) Dust cover
9) Using a press remove the pinion and valve as-
sembly from valve housing.
(1)
(2)
(3)
(1) Valve assembly
(2) Valve housing
(3) Cloth
10) Using the ST and press, remove the dust seal,
oil seal and special bearing from valve housing.
ST 34099FA120 INSTALLER & REMOVER
SEAL
CAUTION:
• Do not apply force to the end surface of valve
housing.
• Do not reuse the oil seal after removal.
(1) Oil seal
(2) Special bearing
STEERING GEARBOX [LHD MODEL]
PS-00144
PS-00149
ST
(1)
(2)
PS-00150
PS-34
11) Remove the snap ring using snap ring pliers.
CAUTION:
Be careful not to scratch the pinion and valve
assembly.
12) Press out the bearing together with the back up
washer using pipe of I.D. 38.5 to 39.5 mm (1.516 to
1.555 in) and press.
(1) Bearing
(2) Backing washer
(3) Oil seal
(4) Pipe
13) Remove the oil seal.
PS-00154
(1)
(2)
(3)
(4)
PS-00157