Subaru Impreza 2003 Service Manual page 2806

AIRBAG SYSTEM
2. Airbag Connector
A: OPERATION
1. POWER SUPPLY
1) How to disconnect:
(1) Move the slide lock (A) in the direction of the
arrow.
(2) Pull the female connector in the direction of
the arrow with slide lock (A) moved.
CAUTION:
When pulling, be sure to hold onto the connec-
tor and not the wire.
2) How to connect:
Holding the connector (A), and push it in carefully
until a connecting sound is heard.
CAUTION:
Be sure to insert the connector in until it locks.
Then pull on it gently to make sure that it is
locked.
AIRBAG CONNECTOR
2. DRIVER'S AIRBAG (BETWEEN AIRBAG
HARNESS AND ROLL CONNECTOR), PAS-
SENGER'S AIRBAG AND SIDE AIRBAG
1) How to disconnect:
(1) Push the lock arm (A).
(2) With the lock arm (A) pushed in, move the
slide lock (B) in the direction of the arrow.
(3) With the slide lock (B) pulled, remove the
AB-00015 lock arm (A) to its original position, and then pull
in the direction of the arrow and separate the
connector.
CAUTION:
When pulling, be sure to hold onto the connec-
tor and not the wire.
AB-00016 2) How to connect:
Holding the connector, and push it in carefully until
a connecting sound is heard.
CAUTION:
Be sure to insert the connector in until it locks.
Then pull on it gently to make sure that it is
locked.
AB-8
(B)
(A)
AB-00017
AB-00018
AB-00019