Subaru Impreza 2003 Service Manual page 2607

20.Hill Holder
A: REMOVAL
1. PHV (PRESSURE HOLD VALVE)
1) Drain the brake fluid from reservoir of master cyl-
inder.
2) Remove the adjusting nut and lock nut.
(3)
(1) Adjusting nut
(2) Lock nut
(3) PHV
3) Remove the cable clamp, and disconnect the
PHV cable from PHV.
CAUTION:
Carefully protect the boots and inner cable
from damage when disconnecting PHV cable.
(1)
(1) PHV cable
(2) Clamp
4) Disconnect the brake pipes from PHV.
CAUTION:
• Pay attention not to drop the brake fluid onto
body painting since it may dissolve paint.
• Pay attention not to damage hexagonal head
of the flare nut by using pipe wrench without
fail.
HILL HOLDER
(1)
(2)
BR-00131
(2)
BR-00132
5) Detach the PHV along with support from side
frame.
CAUTION:
Exercise utmost care to prevent foreign matter
from entering into the PHV when removing it.
(1)
(1) PHV
2. PHV CABLE
1) Remove the adjusting nut and lock nut.
(1) Adjusting nut
(2) Lock nut
(3) PHV
2) Remove the cable clamp, and disconnect PHV
cable from PHV.
CAUTION:
Carefully protect the boot and inner cable from
damage when disconnecting PHV cable.
(1)
(1) PHV cable
(2) Clamp
BR-75
(1)
(2)
(3)
(2)
BRAKE
BR-00133
BR-00131
BR-00132