Subaru Impreza 2003 Service Manual page 2680

POWER ASSISTED SYSTEM (POWER STEERING)
11) Using the ST, clinch steering body cylinder at a
point less than 3 mm (0.12 in) from holder.
CAUTION:
Be careful not to deform the holder.
ST 34099FA060 PUNCH HOLDER
ST
(A) Holder
(B) 3 mm (0.1 in)
12) Roll the vinyl tape on serration part of valve as-
sembly, and then apply grease on the tape surface.
(1) Vinyl tape
STEERING GEARBOX [RHD MODEL]
(A)
(B)
ST
PS-00084
PS-00085
13) Apply a coat of grease on the gear teeth of
valve assembly, and then attach the valve assem-
bly taking care not to scratch oil seal and seal ring.
(1) Seal ring
(2) Oil seal
14) Apply grease on the oil seal circumference, and
then press into the plug using ST and a press. Re-
place the plug circumference O-rings with new
ones.
ST 34199AE110 PLUG OIL SEAL INSTALLER
CAUTION:
Pay attention to the oil seal direction, and at-
taching position.
(1) Plug
(2) O-ring
(3) Oil seal
PS-56
PS-00086
PS-00087