Subaru Impreza 2003 Service Manual page 2808

Hide thumbs Also See for Impreza 2003:
Table of Contents

Advertisement

INSPECTION LOCATIONS AFTER A COLLISION
AIRBAG SYSTEM
3. Inspection Locations After a
Collision
A: REPLACEMENT
When airbag system is deployed, replace the fol-
lowing parts.
1. FRONT COLLISION
1) Driver's airbag module
2) Passenger's airbag module
3) Driver's seat belt (pretensioner)
4) Passenger's seat belt (pretensioner)
5) Airbag control module
6) Front sub-sensor
7) Roll connector
2. SIDE COLLISION
1) Airbag control module
2) Side airbag module (operating side)
3) Side airbag module (operating side)
3. INSPECTION OF OTHER PARTS
Check for the following parts, replace the damaged
parts with new ones.
1) Steering wheel and steering shaft
Check the steering wheel and steering shaft for
mounting condition and deflection of axial and rad-
ical, upward and downward direction. Check the
steering shaft for deflection of axial and radical di-
rection with tilt lever released. (After a collision, ab-
sorbing part of steering shaft may inflate.)
2) Check the direct type connector of driver's air-
bag module, pretensioner, etc. for damage, and
also check each harness for pinch and connector
damage. If damage is found, replace the harness
as a unit.
B: INSPECTION
If the vehicle is involved in a collision on any side,
even if it is a slight collision, be sure to check the
following system parts.
1. DRIVER'S AIRBAG MODULE
1) Check for the following, and replace damaged
parts with new parts.
• Airbag module is cracked or deformed.
• Harness and/or connector is cracked, deformed
or open. Lead wire is exposed.
• The module surface is fouled with grease, oil,
water or cleaning solvent.
2) When installing a new driver's airbag module,
check the following. If necessary, install a new air-
bag module and steering wheel.
• The steering wheel is in the way, making it diffi-
cult to install the airbag module.
• The clearance between the driver's airbag mod-
ule and steering wheel is not constant.
• The steering wheel deformation in axial and radi-
al directions exceed limits.
Specifications:
Height deflection A
Less than 6 mm (0.24 in)
O.D. deflection L
Less than 17 mm (0.67 in)
2. PASSENGER'S AIRBAG MODULE
Check for the following, and replace damaged
parts with new parts.
• Airbag module is cracked or deformed.
• Harness and/or connector is cracked, deformed
or open. Lead wire is exposed.
• Mounting bracket is cracked or deformed.
3. SIDE AIRBAG MODULE
Check for the following, and replace damaged
parts with new parts.
• Front seat is damaged or deformed.
• Harness and/or connector is cracked, deformed
or open.
• Lead wire is exposed.
4. AIRBAG CONTROL MODULE
Check for the following, and replace damaged
parts with new parts.
• Control module is cracked or deformed.
• Mounting bracket is cracked or deformed.
• Connector is scratched or deformed.
• Airbag is deployed.
• Side airbag is deployed.
AB-10
L
A
AB-00028

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents