Subaru Impreza 2003 Service Manual page 2583

6) Connect the brake hose, and tighten the brake
hose flange nut.
Tightening torque:
15 N·m (1.5 kgf-m, 10.8 ft-lb)
7) Connect the ABS wheel speed sensor to back
plate.
Tightening torque:
32 N·m (3.3 kgf-m, 24 ft-lb)
8) Apply grease to the adjusting screw and both
ends of adjuster.
Brake grease:
Dow Corning Molykote No. 7439 (Part No.
003602001)
9) Install the brake shoe. <Ref. to BR-48, INSTAL-
LATION, Rear Drum Brake Shoe.>
10) Install the brake drum. <Ref. to BR-49, IN-
STALLATION, Rear Drum Brake Drum.>
11) After installing the brake assembly, bleed air
from the brake line. <Ref. to BR-63, Air Bleeding.>
REAR DRUM BRAKE ASSEMBLY
BR-00054
BR-51
C: DISASSEMBLY
1) Remove the right and left dust boots from wheel
cylinder.
(1)
(2)
(6)
(7)
(1) Bleeder cap
(2) Bleeder screw
(3) Spring
(4) Cylinder
(5) Cup
(6) Piston
(7) Boot
2) Remove the piston, cup, spring and air bleeder
screw and cap.
BRAKE
(3)
(4)
(5)
BR-00066