7. Pipe Assembly [LHD MODEL]
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Lift-up the vehicle, and then remove the jack-up
plate.
(1) Jack-up plate
3) Remove the one pipe joint at the center of gear-
box, and then connect the vinyl hose to pipe and
joint. Discharge fluid by turning steering wheel fully
clockwise and counterclockwise. Discharge fluid
similarly from the other pipe.
(2)
(1)
(1) Pipe A
(2) Pipe B
PIPE ASSEMBLY [LHD MODEL]
PS-00044
PS-00026
PS-65
POWER ASSISTED SYSTEM (POWER STEERING)
4) Remove the clamp E from pipes C and D.
(3)
(5)
(1) Return hose
(2) Pressure hose
(3) Clamp E
(4) Pipe C
(5) Pipe D
5) Disconnect the pipe C and D from gear box.
(1)
(1) Pipe C
(2) Pipe D
(1)
(2)
(4)
PS-00176
(2)
PS-00027