Subaru Impreza 2003 Service Manual page 2812

AIRBAG SYSTEM
6. Side Airbag Module
A: REMOVAL
CAUTION:
Before working on the airbag module, refer to
the "CAUTION" in General Description. <Ref. to
AB-3, CAUTION, General Description.>
NOTE:
Remove the passenger's side by referring to driv-
er's side.
1) Turn the ignition switch to OFF.
2) Disconnect the ground cable from battery, and
wait for at least 20 seconds before starting work.
3) Remove the front seat from the vehicle. <Ref. to
SE-6, REMOVAL, Front Seat.>
4) Remove the clip, and then remove the side air-
bag harness from slide rail IN (A) and reverse side
of seat cushion assembly.
5) Remove the backrest cover. <Ref. to SE-6, DIS-
ASSEMBLY, Front Seat.>
6) Remove the side airbag harness from backrest
frame assembly.
SIDE AIRBAG MODULE
7) Remove the side airbag module (A) from back-
rest frame assembly.
(A)
AB-00474
AB-00475
AB-14
(A)
AB-00476