Subaru Impreza 2003 Service Manual page 2688

POWER ASSISTED SYSTEM (POWER STEERING)
F: ADJUSTMENT
1) Adjust the front toe. <Ref. to FS-11, FRONT
WHEEL TOE-IN, INSPECTION, Wheel Align-
ment.>
Standard of front toe:
IN 3 — OUT 3 mm (IN 0.12 — OUT 0.12 in)
(1) Lock nut
2) Adjust the steering angle of wheels. <Ref. to FS-
11, STEERING ANGLE, INSPECTION, Wheel
Alignment.>
Standard of steering angle:
Model TURBO, 2.5 L and
OUTBACK
Inner wheel 34.5°±1.5°
Outer wheel 30.3°±1.5°
3) If the steering wheel spokes are not horizontal
when wheels are set in the straight ahead position,
and error is more than 5° on the periphery of steer-
ing wheel, correctly re-install the steering wheel.
4) If the steering wheel spokes are not horizontal
with vehicle set in the straight ahead position after
this adjustment, correct it by turning the right and
left tie-rods in the opposite direction each other by
the same angle.
STEERING GEARBOX [RHD MODEL]
PS-00107
Others
37.3°±1.5°
32.4°±1.5°
0 - 17 mm
(0 - 0.67 in)
PS-00108
PS-64