Ntp 118-5: I-010G-A Indoor Ont With Cabling - Alcatel-Lucent 7302 Information Manual

NTP 118 — Install an I-010G-A indoor ONT
10 Connect the SC/APC fiber optic cable (DLP 125); see Figure
11 If used, configure the SLID (DLP 129).
12 Verify the ONT LEDs.
13 Activate and test the services (DLP 128).
14 STOP. This procedure is complete.
NTP 118-6 November 2013
Figure NTP 118-5: I-010G-A indoor ONT with cabling
SC/APC Ethernet (GE)
connector RJ-45
Danger — Fiber optic cables transmit invisible laser light. To avoid eye
damage or blindness, never look directly into fibers, connectors, or
adapters.
Warning — Be careful to maintain a bend radius of no less than 1.5
inches (3.8 cm) when connecting the fiber optic cable. Too small of a
bend radius in the cable can result in damage to the optic fiber.
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Power
connector
NTP 118-5.
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide
19836