Alcatel-Lucent 7302 Information Manual page 1054

Intelligent services access manager

Hide thumbs Also See for 7302:

Table of Contents

NTP 160 — Install an I-211M-K or I-211M-L indoor ONT

Figure NTP 160-3: Fiber cable routing for the I-211M-L ONT within the Just Inside

November 2013

For the I-211M-L ONT, route the SC/APC fiber optic cable to the ONT as

shown in Figure

Warning — Be careful to maintain a bend radius of no less than 1.5

inches (3.8 cm) when connecting the fiber optic cable. Too small of a

bend radius in the cable can result in damage to the optic fiber.

Position the I-211M-L indoor ONT within the Just Inside enclosure, as

shown in Figure

Secure the I-211M-L indoor ONT within the Just Inside enclosure.

Note — Observe the following:

Do not overtighten the ONT bracket when securing the I-211M-L

indoor ONT to the Just Inside enclosure. The unit can become

skewed and compromise the environmental seal of the ONT mounted

in the outdoor enclosure.

Go to step 6.

Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02

System Status

Battery Power

Replace Battery

Auxillary Power

Emergency Use

ONT Product Information Guide

Locking screw

3FE 55873 AAAA TCZZA