NTP 131 — Replace an I-010G-U indoor
Purpose
This DLP provides the steps to replace an I-010G-U indoor ONT.
General
The DLPs listed in this NTP describe mounting and cabling for the I-010G-U indoor ONT.
Prerequisites
See the listed DLPs for prerequisites.
Required tools
The required tools are:
wire strippers
•
#2 Phillips screwdriver
•
fiber optic splicing tools
•
RJ-45 cable plug crimp tool
•
Procedure
Use this procedure to replace an I-010G-U indoor ONT.
1
Deactivate the ONT services (DLP 131). If you are using the SLID feature, this step
is not required. The ONT and the services can remain in service (IS).
2
Disconnect the power and Ethernet cables; see Figure
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
3FE 55873 AAAA TCZZA
Edition 01
ONT Product Information Guide
ONT
NTP 131-1
and
NTP
131-2.
November 2013
NTP 131-1