Ntp 109-1: B-8102-A And B-8112-A Business Ont Connections) - Alcatel-Lucent 7302 Information Manual

Figure NTP 109-1: B-8102-A and B-8112-A business ONT connections)
Fiber storage
tray
SC/APC fiber
connector
(Optional)
Class 1 power and
fiber conduit box
4 Route and secure the cables to the business ONT (DLP 109).
5 Connect the ground wire (DLP 147).
6 Connect the Ethernet cables (DLP 102).
7 Connect the DS1/E1 cables to the RJ-48C ports (DLP 104).
8 Connect the POTS cables (DLP 103).
9 Connect the coaxial cable (DLP 116).
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
Warning 1 — When installing the B-8102-A or B-8112-A business ONT
according to inter-building wiring practices, a minimum 26 AWG
telecommunication line cord must be installed as the POTS cable for
those POTS ports configured as TNV-3 ports.
Warning 2 — For TNV-3 POTS ports, Primary Protector (listed to
UL497) with secondary protection that is current limiting must be
installed on all POTS wiring entering a premises.
NTP 109 — Install a B-8102-A or B-8112-A ONT
Craft port
Power and alarm
connector
INPUT RATING: DC
45V 55V 1.0A
CRAFT
1
BLK
2
PWR
LINE
1
3
BTRY
LINE
2
4
T
FAIL
LINE
3 R
VIDEO
LINE
4
5
DATA
LINE
5
6
NTWK
LINE
6
7
MGMT
INTF
LINE
7
POTS
LINE
TELCO ACCESS TELCO ACCESS
8
ETHERNET
1
DS1
THIS DEVICE IS INTEDED TO BE
ATTACHED TO A RECEIVER THAT IS
NOT USED TO RECEIVE OVER-THE0AIR 1
BROADCAST SIGNALS. CONNECTION OF
THIS DEVICE IN ANY OTHER FASHION
MAY CAUSE HARMFUL INTERFERENCE
TO RADIO COMMUNICATION AND IS
IN VIOLATION OF THE FCC RULES,
PART 15.
2
VIDEO
DS2
F-type
coaxial
GND
November 2013
POTS screw
type block
POTS ports
(RJ-11)
Ethernet port
(RJ-45)
DS1/E1 port 1
(RJ-48C)
DS1/E1 port 2
(RJ-48C)
18885
NTP 109-3