Alcatel-Lucent 7302 Information Manual page 378

5 — VoIP overview
Parameter Description
SIP_poundke The parameter determines whether
y_escape the # key is translated to %23 (per
RFC2361) or is not translated per
request by China operators.
When set to true, translate to %23.
When set to false, no translation
(report # directly).
dns_redun_ The DNS server selection mode.
mode
•
dns_redun_primary: Any new
DNS look-up request gets always
sent to the highest priority DNS
server irrespective of whether
the previous DNS look-up request
got replied by the highest
priority DNS server or not.
•
dns_redun_at_successful: A new
DNS look-up request gets sent to
the DNS server that successfully
replied to the previous DNS
look-up request. This DNS server
remains addressed for as long as
a reply gets received from this
DNS server during the initial
retransmission interval.
dns_ini_retr The initial retransmission time
_int interval after which the DNS resolver
will send the first retransmission for
the DNS look-up request.
Use an integer value from 200 to
1000 ms.
dns_max_re The maximum number of DNS
tr_nbr look-up retransmissions to be
addressed to the same DNS server in
case of no response. The
retransmission algorithm is based on
an initial transmission of the query
and a number of retransmissions.
Use an integer value from 0 to 4.
dns_purge_t The DNS purge timer intends to
imer overrule the TTL value in case the
latter value would be set to an
excessively long time.
The maximum resource record
caching time equals:
RR caching time = MIN [DNS purge
timer; MINTTL]
Whereby MINTTL = MIN {[TTL
NAPTR]*; [TTL SRV]*; [TTL A]*}
The DNS purge timer gets disabled
when set to the value "0".
In this case the maximum resource
record caching time equals:
RR caching time = MINTTL = MIN
{[TTL NAPTR]*; [TTL SRV]*; [TTL A]*}
Use an integer value from 0 to 86400
s.
(7 of 7)
5-32 November 2013
Mode Mode
1 2
Y Y
Y Y
Y Y
Y Y
Y Y
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Device OMCIv2 TL1 and CLI
support? parameters
All No, value N/A
except is derived
package from
C, D, FTP/defau
and E lt line
profile.
Package Y N/A
L ONTs
only
Package Y N/A
L ONTs
only
Package Y N/A
L ONTs
only
Package Y N/A
L ONTs
only
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide