Alcatel-Lucent 7302 Information Manual page 417

Parameter Description
TimeZoneOffset The difference expressed in
seconds between UCT (what is
kept by NTP) and the local time.
This value should be added to
the UCT whenever it is to be
displayed to the subscriber (at
the moment the only application
of this is caller ID display. If
TL1/OMCI configured as well as
XML have TimeZoneOffset as
non-zero value, then TL-1 takes
precedence over the XML
provided one.
This requires change of XML file
to update time zone offset.
Therefore it not recommended
for use by customers. Contact
your Alcatel-Lucent support
representative.
Privacy Specifies whether outgoing
INVITE messages contain privacy
header information. Null
(default) or empty indicates no
privacy header, none indicates
Privacy:none in INVITE requests,
and id indicates Privacy:id in
INVITE requests.
Mode Specifies whether the preferred
ID is carried in the outgoing
INVITE message. The options are
true and false (default)
ID Specifies the preferred ID when
the Mode parameter is set to
true or contains a null string if
the preferred ID is generated
elsewhere. The ID is a string of
up to 63 characters.
Support100rel Specifies whether 100rel is
contained in the support header
of a SIP request message to
initiate a dialog.
When set to true, 100rel is
contained in the outgoing INVITE
message.
When set to false (default)
100rel is not in the header.
Require100rel Specifies whether 100rel is
contained in the require header
of a SIP provision response
message if the other device
supports 100rel.
When set to true, 100rel is
contained in the provision
response message.
When set to false (default)
100rel is ignored.
(29 of 30)
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
Mode Mode Device
1 2
N Y Package
C, D, E,
F, and G
N Y Package
C, D, E,
F, and G
N Y Package
C, D, E,
F, and G
N Y Package
C, D, E,
F, and G
N Y Package
C, D, E,
F, and G
N Y Package
C, D, E,
F, and G
November 2013
5 — VoIP overview
OMCIv2 TL1 or CLI
support? parameters
If TL1 is also Yes
configured
and XML has
it configured
to a
non-zero
value, then
TL1 takes
precedence
over XML
No, value N/A
derived
from XML
only
No, value N/A
derived
from XML
only
No, value N/A
derived
from XML
only
No, value N/A
derived
from XML
only
No, value N/A
derived
from XML
only
5-71