NTP 125 — Replace an I-010G-P,
Purpose
This NTP provides the steps to replace I-010G-P, I-020G-P, or an I-040G-P indoor ONTs.
General
The DLPs listed in this NTP describe mounting and cabling for the replacement of
I-010G-P, I-020G-P, and I-040G-P indoor ONTs.
Prerequisites
See the listed DLPs for prerequisites.
Recommended tools
You need the following tools for replacing the ONT:
fiber optic splicing tools
•
RJ-45 cable plug crimp tool
•
voltmeter or multimeter
•
optical power meter
•
wall mount template
•
screwdriver for wall mounting the ONT unit
•
drill and drill bits
•
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
3FE 55873 AAAA TCZZA
Edition 01
ONT Product Information Guide
I-020G-P, or an I-040G-P
indoor ONT
November 2013
NTP 125-1