Alcatel-Lucent 7302 Information Manual page 449

4 Configure the IP address on the laptop Ethernet port to 192.168.1.x. For example,
192.168.1.100.
5 Perform one of the following:
a
b
6 Log in to a Telnet session:
<L>ogin
User Name:CRAFTSPERSON
Password:ALC#FGU
where
User Name is the username for the ONT
Password is the password for the ONT
The
7 STOP. This procedure is complete.
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
To connect the ONT using an Ethernet port and cable to a computer or
laptop, start a Telnet session by typing
telnet 192.168.1.x↵
Note — Any three digits can supply the last segment of the 192.168.1.x
IP address. For example, 192.168.1.100 is a valid IP address.
To connect the computer or laptop to the ONT using a Telnet client, start a
Telnet session by typing
telnet 192.168.1.251↵
Note — NetTerm is the recommended Telnet client.
SLID menu appears.
6 — ONT management using an ONT interface
November 2013 6-17