Alcatel-Lucent 7302 Information Manual page 632

NTP 110 — Replace a B-8102-A or B-8112-A ONT
9 Reconnect the SC/APC fiber optic cable (DLP 160).
10 Verify the ONT LEDs, voltage status, and optical signal levels (DLP 127).
11 Activate and test the services (DLP 128).
12 Reattach the power connector inner cover.
13 Close the fiber connection area TELCO access cover in the ONT unit and secure
using the security wrench.
14 Close the front cover of the outdoor ONT unit and secure using the security
wrench.
15 STOP. This procedure is complete.
NTP 110-4 November 2013
Warning — Be careful to maintain a bend radius of no less than 1.5
inches (3.8 cm) when connecting the fiber optic cable. Too small of a
bend radius in the cable can result in damage to the optic fiber.
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide