Alcatel-Lucent 7302 Information Manual page 374

5 — VoIP overview
Parameter Description
OutboundPr Mandatory parameter that indicates
oxy (1) the address of a server or proxy to
which all SIP requests are to be sent,
except for those for which a server of
proxy is not otherwise specified. It is
either a numeric IP address or a fully
qualified domain name. This is a
string of up to 99 characters and is a
required parameter.
When the string dhcp is used, this
keyword substitutes the IP address or
domain name returned from DHCP
option 120 instead of the
RegistrarRoute parameter value. If
the DHCP server does not provide an
option 120 value, a 0.0.0.0 address is
substituted and invite failure and
subscribe failure alarms are raised
for each configured POTS line.
The OutboundProxy value is
superseded for INVITE requests if the
outbound_uri_suffix value is
configured.
DHCP Option 120 is supported on
some devices as of Release 04.08.48.
Contact your support representative
for more information.
•
outbound_uri_prefix
number + @ + outbound_proxy
when the oubound_uri_suffix
value is not configured
•
outbound_uri_prefix
number + outbound_uri_suffix
when the oubound_uri_suffix
value is configured
OutboundPr Optional parameter that indicates
(1)
oxySec the address of a server or proxy to
which all SIP requests are to be sent,
except for those for which a server of
proxy is not otherwise specified. It is
a numeric IP address. The default is
a null string.
The OutboundProxySec value is
superseded for INVITE requests if the
outbound_uri_suffix value is
configured.
•
outbound_uri_prefix
number + @ + outbound_proxy
when the oubound_uri_suffix
value is not configured
•
outbound_uri_prefix
number + outbound_uri_suffix
when the oubound_uri_suffix
value is configured
DomainNam This parameter is used to compose
e the Callee's host part of the SIP
INVITE request and is also used in the
"TO" header, for example,
(callee)DN@DomainName.
(3 of 7)
5-28 November 2013
Mode
1
Y
(2)
(1) + dialed
(1) + dialed
Y
(2)
(1)
+ dialed
(1) + dialed
Y
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Mode Device OMCIv2
2 support?
Y All Yes, TL1
and CLI
allows SIP
URI for
outbound
proxy but
the ONT
expects a
string in a
non-URI
format.
Y Some No
package
C,
package
D, and
package
E MDUs
Y Package Y
L ONTs
only
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide
TL1 and CLI
parameters
TL1 using
OUTPROXYSERVER
PROFID using
ent-ontsip-config
CLI using
outproxyserv-prof
using
configure voice
ont sip-config
N/A
N/A