Alcatel-Lucent 7302 Information Manual page 383

Parameter Description
timed_release The duration, in seconds, of the
Timed Release timer. To end a
TimedReleaseTi
conversation, the local or remote
mer
subscriber hangs up. If the local
subscriber hangs up, BYE is sent to
the softswitch immediately unless
this was a termination end of the
call. If the local call was the
termination call, BYE is not sent and
the idle state is entered until the
re-answer timer expires or BYE is
received. The re-answer timer is
configured using the reanswer_timer
parameter.
This is an optional parameter. This is
a non-negative integer and the value
is expressed in seconds. The default
value in the XML file is 10 seconds.
The default is 10 for TL1.
enter_key The digit that is to be treated as an
indication that dialing is complete,
EnterKey
when received at a point in digit
collection where it does not match
the dialing pattern at that point. This
is typically used to signal the
completion of dialing a speed dialing
number or an international number.
This is an optional parameter. The
hash mark symbol "#" is the default
value.
Other devices always use #.
(2 of 4)
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
Mode Mode Device
1 2
Y Y All
Y Y Package
A, B, H
only
November 2013
5 — VoIP overview
OMCIv2 TL1 or CLI
support? parameters
Yes TL1 using
RLSTIMER using
ed-ontvoiceport
sip
CLI using
rlstimer
using
configure voice
ont
voice-sip-port
No, value N/A
is derived
from
FTP/defau
lt line
profile.
5-37