NTP 160 — Install an I-211M-K or
Purpose
This NTP provides the steps to install an I-211M-K or I-211M-L ONT.
General
The steps listed in this NTP describe installing and cabling for I-211M-K ONTs and
connection to a power converter.
Prerequisites
None.
Recommended tools
You may need the following tools for the installation:
screwdriver for wall mounting the ONT unit
•
Phillips screwdriver for connecting the SC/APC cable
•
fiber optic splicing tools
•
•
RJ-45 cable plug crimp tool
voltmeter or multimeter
•
optical power meter
•
drill and drill bits
•
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
3FE 55873 AAAA TCZZA
Edition 01
ONT Product Information Guide
I-211M-L indoor ONT
November 2013
NTP 160-1