Alcatel-Lucent 7302 Information Manual page 357

Service
Fax service
Caller ID
DTMF
Codec commit re-INVITE
(1)
Session timer
Packetization interval
(1) (2)
Automatic callback
Conference calling (ANSI)
(1) (2)
Conference calling (ETSI)
Direct connect (Hot Line)
Direct connect (Warm
Line)
Distinctive ringing
Home intercom (1) (2)
(2 of 3)
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
Description
T.38
Pass through
Delivery of calling party number and
name
Caller ID
RFC2833
Inband
INFO based (1) (2)
For softswitches that do not support
extra invite messages generated by the
ONT due to use of multiple codecs
—
—
—
Call parties are joined together at a
softswitch server
Call parties in a 3-way conference are
joined together at an ONT
6-way conference
Call parties in a 3-way conference are
joined together at an ONT
Configurable directory number is called
automatically when a subscriber goes off
hook
Configurable directory number is called
automatically when a subscriber goes off
hook and does not dial before the initial
digit timeout period.
Outside call alerting
Priority call
Screening list
Teen line
Allows conversation between two phones
on the same physical POTS line as though
in a normal call, but without establishing
a network connection
5 — VoIP overview
SIP SIP OMCIv2
mode 1 mode 2
Y Y Fully configurable
Y Y
Y Y Basic caller ID is
configurable using TL1.
Y Y
Details such as ID format,
URI preference, and
country code stripping
must be configured using
XML
— Y Symmetric feature only
supported using XML. INFO
Y —
based only supported using
— Y
XML.
Y Y peer_codec_commit only
configured using XML.
Y Y Session timer default
values are used when
configured using TL1.
Y Y default_packetization_int
erval is only configurable
using XML.
Y Y Fully configurable
Y — Fully configurable
— Y
— Y
Y — ETSI mode cannot be
configured using TL1.
Y Y Fully configurable
Y Y Fully configurable
Y Y Fully configurable
Y Y
Y Y
Y Y
— Y Only one service code is
supported when
configured using TL1.
November 2013 5-11