Alcatel-Lucent 7302 Information Manual page 373

Parameter Description
RegistrarRou Optional parameter that indicates
teSec (1) (3) the address of the server or proxy to
which REGISTER requests are sent. It
is a numeric IP address. The default
is a null string.
Can use the form
xxx.xxx.xxx.xxx:port, where
xxx.xxx.xxx.xxx is the IP address and
port is the port number from
transport_protocol
register_per The registration expiration time that
(1)
iod the client will propose by including it
in an Expires header of a REGISTER
request. This is a non-negative
integer and the value is expressed in
seconds. The default value is 3600.
register_hea The number of seconds prior to
d_start (1) expiration of a registration at which
the client sends a REGISTER request
to refresh the registration. This is a
non-negative integer and the value is
expressed in seconds. The default
value is 60.
register_retr The interval between successive
y_interval (1) registration retries after a failed
registration retry. The value is
expressed in seconds. The range is
zero (0) to 65535 and zero (0)
disables registration. The default
value is 60.
(2 of 7)
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
Mode Mode Device
1 2
Y Y Some
package
C,
package
D, and
package
E MDUs
Y Y All
Y Y All
Y Y All
5 — VoIP overview
OMCIv2 TL1 and CLI
support? parameters
No N/A
Yes TL1 using
REGEXPTIME using
ent-ontsip-config
CLI using
reg-expire-time
using
configure voice
ont sip-config
Yes, TL1 using
default REREGHEADSTRT
value in using
TL1 and ent-ontsip-config
CLI is 360
CLI using
seconds.
re-reg-head-start
using
configure voice
ont sip-config
No, value N/A
is derived
from
FTP/defau
lt line
profile.
November 2013 5-27