Safety Information - Alcatel-Lucent 7302 Information Manual

Intelligent services access manager

Hide thumbs Also See for 7302:

Table of Contents

NTP 136 — Install an I-011G-A, I-011G-B, I-110G-A, or I-111G-A indoor ONT

Safety information

Read the following safety information before installing the ONT.

November 2013

Danger — Observe the local and national laws and regulations that

may be applicable to this installation.

Warning 1 — This equipment is ESD sensitive. Proper ESD protections

should be used when connecting or removing cables to or from the ONT.

Warning 2 — If the coaxial output of the ONT is connected to the

dwelling infrastructure coaxial distribution system, ensure that the

coaxial distribution system is separately grounded. Grounding of the

dwelling coaxial infrastructure shall use Listed grounded devices and

must be installed in accordance with local Codes and Article 800 of the

National Electric Code, ANSI/NFPA 70, following the manufacturers

instructions.

Caution — Keep ONTs out of direct sunlight. Prolonged exposure to

direct sunlight can damage the unit.

Note — Observe the following:

The ONT should be installed in accordance with the applicable

requirements of the NEC or CEC. Local authorities and practices take

precedent when there is conflict between the local standard and the

The ONT must be installed by qualified service personnel.

I-011G-A, I-011G-B, I-110G-A, and I-111G-A unit data sheet

the unit data sheet for the temperature ranges for this ONT.

Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02

3FE 55873 AAAA TCZZA

ONT Product Information Guide